In thermal power plants, an ash handling system is used to collect and dispose off discharged ash, once it has been cooled down to a manageable temperature, which is then used in various industries like construction, cement plants, and other allied industries. Simply so, why is it important to prefer ash handling?
Explanation: Considering the large coal burning capacity plant of modern times, the amount of ash produced when the coal is burnt is in thousands of tones. It could have an effect on other subjects too if the proper ash handling methods are not followed.
Beside above, why it is essential to quench the ash before handling? Ash needs to be quenched before handling due to following reasons: (i) Quenching reduces corrosion action of the ash. (ii) It reduces the dust accompanying the ash. (iv) Ash forms clinkers by fusing in large lumps and by quenching clinkers will disintegrate.
Likewise, what is ash handling system?
Ash handling refers to the method of collection, conveying, interim storage and load out of various types of ash residue left over from solid fuel combustion processes. The most common types of ash resulting from the combustion of coal, wood and other solid fuels. bottom ash. bed ash. fly ash.
What is the important feature of hydraulic ash handling system?
Explanation: Particularly in hydraulic system the ash is actually quenched in water. So, there is less chance that ash has any possibility of getting in contact with the machineries.
Related Question Answers
Which ash handling system is most energy efficient?
Dry bottom ash handling techniques offer increased thermal efficiency, reduced unburned carbon and improved ash quality. The dry bottom system comprises a submerged scraper conveyor for cooling and transmitting the hot bottom ash to the crusher. What is bottom ash handling system?
ANDRITZ ash handling systems include conveyors and other equipment necessary for removal of bottom ash and fly ash from the power boiler. Water-cooled screws or chain conveyors can be adapted easily for different furnace configurations and for any type of solid fuel being combusted. How the ash handling system is classified?
CLASSIFICATION OF ASH HANDLING SYSTEMS:Hydraulic System: In this system, ash from the furnace grate falls into a system of water traveling at a high-pressure and is carried to the sumps. Pneumatic System: In this system ash from the boiler ash outlet falls into a blow tank provided below the ash hopper.
Why is coal pulverized?
Pulverized coal firing ensures complete combustion of coal, thus ensuring higher efficiency of steam generators. It is predominantly adopted in large coal-fired utility boilers. The finer the grinding of coal, the more efficient its combustion. Which coal will have highest ash content?
Anthracite
What is the main objective beyond treating feed water?
What is the main objective beyond treating feed water? Explanation: The main objective to treat feed water is to prevent damage by scaling and exchange heat without scaling to produce high quality steam. What is the percentage of ash content in Indian coal?
High Ash content. Ash content of coal produced in the country is generally 25 to 45 % whereas average ash content of imported coal varies from 10 to 20 %. Indian Coal has comparatively higher ash content than imported coal due to drift theory of formation of coal deposits in India. Which type of cooling pond system are nozzles arranged on same elevation?
4. In which type of cooling pond system are nozzles arranged on same elevation? Explanation: In a single deck system spray nozzles are arranged at the same elevation. Its effective cooling effect is less than double deck system. What is fuel handling system?
Fuel Handling SystemsThe fuel processing is used to produce fuel of right size suitable as per the specification of the FBC Boilers/Heaters. The entire system is conceptualized based on parameters such as fuel to be handled, capacity required, availability of space, processing required, economical considerations, etc.
What are ashes composed of?
Depending on what is burned, ash can consist of different chemical components. However, the main chemical component of ash is carbon, with varying amounts of other elements including calcium, magnesium, potassium, and phosphorus - all of which were not burned when the fuel was used. What is PF boiler?
Pulverized coal (pulverized fuel-pf) has been fired in rotary cement kilns (see Kilns) and boiler furnaces (see Boilers). The coal is pulverized to a fine powder, usually so that 70% is less than about 75 μm in size, before being carried by part of the combustion air stream to the burners. What are the methods used for handling of coal?
Handling of coal is mostly done at the power plant using coal handling facilities consisting of ship unloaders, conveyor belts, stock piles, silos or bunkers. What is coal handling plant?
The coal handling plant crushes coal into graded sized chunks, stockpiling grades while preparing it for transport to market and, more often than not, loads the coal into rail cars or barges. What kind of process does a steam power plant undergoes?
5. What kind of a process does a 'Steam Power Plant' undergoes? Explanation: As the internal energy change in the 'Steam Power Plant' is ZERO. Hence, the entire plant obeys a Cyclic Process. What is coal handling plant in thermal power plant?
The Function of coal Handling Plant in thermal power plant is to receive , process, store, feed the coal bunkers consistently over entire life of the power plant. Coal is transported in thermal power station either by railways,roadways or rope ways. What is the advantage of stocking the coal in huge heaps?
What is the advantage of stocking the coal in huge heaps? Explanation: Coal is piled in heaps of 10 to 12m height on a concrete floor, by compacting it in the layers of 20 to 30cm thickness using bulldozers. This prevents air circulation in the interior of the heap. What is the function of condenser in thermal power plant?
In thermal power plants, the purpose of a surface condenser is to condense the exhaust steam from a steam turbine to obtain maximum efficiency, and also to convert the turbine exhaust steam into pure water (referred to as steam condensate) so that it may be reused in the steam generator or boiler as boiler feed water. Why ash and dust handling problem is more difficult than coal handling problem explain it in details?
Ash produced is about 10 to 20% of the total coal burnt in the furnace. . Handling of ash is a problem because ash coming out of the furnace is too hot, it is dusty and irritating to handle and is accompanied by some poisonous gases. (iv) It produces poisonous gases. (v) It has corrosive action. How many hoppers are present in the ESP for one unit?
Each ESP has four flue gas inlets. Every inlet has 12 hoppers in the form of 6 rows and 2 columns. Three heater coils are installed in each hopper [4]. How can we achieve high thermal efficiency in a power plant?
Greater efficiency can be principally achieved by increasing the combustion and gas intake temperature in the gas turbine. With the use of new materials and construction systems in the high-pressure part of gas turbines, combined cycle power plants are now achieving efficiencies of more than 60%. What is the effect of increasing steam pressure on efficiency of steam power plant?
A 10% increase in steam pressure will reduce the steam consumption by about 1% in a condensing steam turbine and by about 4% in a back pressure steam turbine. The effect on efficiency for 10% increase in pressure is about 1.5% for a condensing steam turbine and 0.45% for a back pressure steam turbine. What is the ideal site for power plant?
However, keeping in view the fact that now-a-days the supply system is a.c. and more importance is being given to generation than transmission, a site away from the towns may be selected.In particular, a site by river side where sufficient water is available, no pollution of atmosphere occurs and fuel can be What would be the most important factor under consideration for the site selection of thermal plant?
What would be the most important factor under consideration for the site selection of a thermal plant? Availability of fuel availability of water distance from the populated area cost and the type of land? zinabby4431 is waiting for your help. Add your answer and earn points. Which fuel is called secondary stage in the formation of coal?
Lignite—the second stage—is formed when peat is subjected to increased vertical pressure from accumulating sediments. What is the overall efficiency of nuclear power plant?
Typical nuclear power plants achieve efficiencies around 33-37%, comparable to fossil fueled power plants. Higher temperature and more modern designs like the Generation IV nuclear reactors could potentially reach above 45% efficiency. Why boiler Draught is most essential part of the thermal plants?
Why boiler draught is most essential part of the thermal plants? Explanation: Boiler draught is the difference of pressure required to maintain constant flow of air into the furnace and to discharge the flue gases to the atmosphere through a chimney. Explanation: Natural draught is produced by using a chimney. Which of the following is not used in gas turbine power plant?
2. Which of the following is not used in gas turbine power plant? Explanation: Natural gas itself or mixture of natural gas and air is used as working medium in gas turbine power plant. Condenser is a device or arrangement used to condense low pressure steam already used by turbine. What is Pulverised coal Mcq?
ANSWER: Coal broken into fine particles. In what form does the total ash produced in the furnace escapes through the chimney?
In an industrial context, it has traditionally referred to coal combustion and comprises traces of combustibles embedded in forming clinkers and sticking to hot side walls of a coal-burning furnace during its operation. The portion of the ash that escapes up the chimney or stack is, however, referred to as fly ash. 
